Loa Peavey SP2

Mô tả sản phẩm: Loa Peavey SP2

• Frequency response: 1 meter on-axis swept-sine in anechoic environment




• 54 Hz to 17 kHz (±3 dB)




• Usable low frequency limit: 44 Hz (-10 dB point)


• Full range Power handling:




• Continuous: 500 Watts


• Program: 1,000 Watts


• Peak: 2,000 Watts




• Low frequency Power handling:




• Continuous: 500 Watts


• Program: 1,000 Watts


• Peak: 2,000 Watts




• High frequency Power handling:




• Continuous: 60 Watts


• Program: 120 Watts


• Peak: 240 Watts




• Sound pressure level: 1 Watt, 1 meter in anechoic environment




• Full range: 98.0 dB SPL (2.83 V input)


• Low frequency: 99 dB SPL (2.83 V input)


• Mid/high frequency: 110 dB SPL (2.83 V input)




• Maximum sound pressure level: (1 meter)




• Full range: 125 dB SPL continuous (131 peak)


• Low frequency section: 126 dB SPL continuous (132 peak)


• High frequency section: 129 dB SPL continuous (135 peak)




• Radiation angle measured at -6 dB point of polar response:




• 90 degrees horizontal by 40 degrees vertical


• Vertical main polar lobe is angled down 10 degrees
  


• Straight ahead being +10, -30 degrees




• Transducer complement:




• Low frequency: 1x 15 inch woofer, vented 1508-8 HE SF


• High frequency: 1x .875 inch exit (51 mm voice coil)


• RX 22 compression driver on an asymmetrical Quadratic Throat CD horn




• Box tuning frequency:




• Low Frequency Section: 55 Hz


• Crossover frequency (internal passive): 1800 Hz (Low-High)




• Recommended Active Crossover Frequency Region and Slope:




• Low Frequency – High Frequency: 1,800 Hz at 12 dB/octave




• Time Offset:




• Low frequency: 0.0 ms


• Mid/high frequency: 0.48 ms




• Impedance (Z):




• Full Range: Nominal: 8.0 ohms (Minimum: 6.0 ohms)


• Low Frequency: Nominal: 8.0 ohms (Minimum: 6.9 ohms)


• Passive HF: Nominal: 8.0 ohms (Minimum: 5.4 ohms)




• Input connections: Full Range




• Two 1/4 inch phone jacks


• One Neutrik four-pin Speakon jack


• Bi-amp capability provided via an internal wiring jumper




• Enclosure materials: Aspen hardwood plywood


• Enclosure Finish: Hammertex covering


• Mounting provisions:




• Built-in SA-1 stand-mount adapter


• Four large rubber feet on bottom for floor use


• Not designed for overhead suspension




• Dimensions: (H x W x D)




• Front: 30.75 x 20.56 x 23 inches (781 x 522 x 584 mm)


• Rear: 30.75 x 12.5 x 23 inches (781 x 314 x 584 mm)




• Net Weight: 71 lbs (32.3 kg)

Danh sách bình luận

Tham gia bình luận